Loading
Document Name
Sort Generated Document By
Total Credit Requested
$ 0.00
Preview
Create
Header Text
Total Credit Requested
$ 0.00
Preview
Create
Viewing:

1234 Main St.
Henderson , NV 89044
02/21/2020 9:00AM

Sample agent
agent

Agent Name

Agency Name
85
Items Inspected
22
Recommendation
4
Deficiency

1 - Inspection Details

General Inspection Info: Occupancy
Vacant
General Inspection Info: Weather Conditions
Sunny
General Inspection Info: Type of Building
Single Family
General Inspection Info: In Attendance
Client, Client's Agent

I prefer to have my client with me during my inspection so that we can discuss concerns, and I can answer all questions. 

Your Job As a Homeowner: What Really Matters in a Home Inspection

Now that you've bought your home and had your inspection, you may still have some questions about your new house and the items revealed in your report. 

Home maintenance is a primary responsibility for every homeowner, whether you've lived in several homes of your own or have just purchased your first one. Staying on top of a seasonal home maintenance schedule is important, and your InterNACHI Certified Professional Inspector can help you figure this out so that you never fall behind. Don't let minor maintenance and routine repairs turn into expensive disasters later due to neglect or simply because you aren't sure what needs to be done and when. 

Your home inspection report is a great place to start. In addition to the written report, checklists, photos, and what the inspector said during the inspection not to mention the sellers disclosure and what you noticed yourself it's easy to become overwhelmed. However, it's likely that your inspection report included mostly maintenance recommendations, the life expectancy for the home's various systems and components, and minor imperfections. These are useful to know about. 

But the issues that really matter fall into four categories: 

  1. major defects, such as a structural failure; 
  2. things that can lead to major defects, such as a small leak due to a defective roof flashing; 
  3. things that may hinder your ability to finance, legally occupy, or insure the home if not rectified immediately; and 
  4. safety hazards, such as an exposed, live buss bar at the electrical panel. 

Anything in these categories should be addressed as soon as possible. Often, a serious problem can be corrected inexpensively to protect both life and property (especially in categories 2 and 4). 

Most sellers are honest and are often surprised to learn of defects uncovered during an inspection. It's important to realize that sellers are under no obligation to repair everything mentioned in your inspection report. No house is perfect. Keep things in perspective as you move into your new home. 

And remember that homeownership is both a joyful experience and an important responsibility, so be sure to call on your InterNACHI Certified Professional Inspector to help you devise an annual maintenance plan that will keep your family safe and your home in good condition for years to come.




Your Job As a Homeowner: Read Your Book

I have provided you a home maintenance book.  It includes information on how your home works, how to maintain it, and how to save energy.  Please write my contact information within the book's inside cover, so that you can always contact me. 

We're neighbors! So, feel free to reach out whenever you have a house question or issue.  


Your Job As a Homeowner: Schedule a Home Maintenance Inspection

Even the most vigilant homeowner can, from time to time, miss small problems or forget about performing some routine home repairs and seasonal maintenance. That's why an Annual Home Maintenance Inspection will help you keep your home in good condition and prevent it from suffering serious, long-term and expensive damage from minor issues that should be addressed now. 

The most important thing to understand as a new homeowner is that your house requires care and regular maintenance. As time goes on, parts of your house will wear out, break down, deteriorate, leak, or simply stop working. But none of these issues means that you will have a costly disaster on your hands if you're on top of home maintenance, and that includes hiring an expert once a year. 

Just as you regularly maintain your vehicle, consider getting an Annual Home Maintenance Inspection as part of the cost of upkeep for your most valuable investment your home. 

Your InterNACHI-Certified Professional Inspector can show you what you should look for so that you can be an informed homeowner. Protect your family's health and safety, and enjoy your home for years to come by having an Annual Home Maintenance Inspection performed every year. 

Schedule next year's maintenance inspection with your home inspector today!


Every house should be inspected every year as part of a homeowner's routine home maintenance plan. Catch problems before they become major defects.




Details

InterNACHI is so certain of the integrity of our members that we back them up with our $10,000 Honor Guarantee. 

InterNACHI will pay up to $10,000 USD for the cost of replacement of personal property lost during an inspection and stolen by an InterNACHI-certified member who was convicted of or pleaded guilty to any criminal charge resulting from the member's taking of the client's personal property.  

For details, please visit www.nachi.org/honor


While I'm Here...: Reading the Report.
  • Make sure to read the entire report. This report has tons of information about the home. Open all 3 tabs under each section. Information, Limitations, Standards.
  • If you want to skip to the meat and potatoes, click the summary tab below the main picture at the top of the report. 
  • I have included some links to web pages for more information about the specific items. 
  • Click on pictures; it makes them bigger. 
  • Hover over any "chat bubbles" on the lower-left corner of pictures. I put comments about the subject of the picture.


Please refer to the Home Inspection Standards of Practice while reading this inspection report.  I performed the home inspection according to the standards and my clients wishes and expectations.  Please refer to the inspection contract or agreement between the inspector and the inspector's client.  

2 - Exterior

Wall-Covering, Flashing & Trim: Worn Out Areas of Exterior Wall-Covering

I observed indications of worn out areas, delayed maintenance, or aging. 

General: Homeowner's Responsibility

The exterior of your home is slowly deteriorating and aging. The sun, wind, rain and temperatures are constantly affecting it. Your job is to monitor the buildings exterior for its condition and weathertightness. 

Check the condition of all exterior materials and look for developing patterns of damage or deterioration. 

During a heavy rainstorm (without lightning), grab an umbrella and go outside. Walk around your house and look around at the roof and property. A rainstorm is the perfect time to see how the roof, downspouts and grading are performing. Observe the drainage patterns of your entire property, as well as the property of your neighbor. The ground around your house should slope away from all sides. Downspouts, surface gutters and drains should be directing water away from the foundation. 

General: Exterior Was Inspected

I inspected the exterior of the house.

Eaves, Soffits & Fascia: Eaves, Soffits and Fascia Were Inspected

I inspected the eaves, soffits and fascia.  I was not able to inspect every detail, since a home inspection is limited in its scope. 

Wall-Covering, Flashing & Trim: Type of Wall-Covering Material Described
Stucco

The exterior of your home is slowly deteriorating and aging.  The sun, wind, rain and temperatures are constantly affecting it.  Your job is to monitor the house's exterior for its condition and weathertightness. 

Check the condition of all exterior wall-covering materials and look for developing patterns of damage or deterioration. 

Vegetation, Surface Drainage, Retaining Walls & Grading: Vegetation, Drainage, Walls & Grading Were Inspected

I inspected the vegetation, surface drainage, retaining walls and grading of the property, where they may adversely affect the structure due to moisture intrusion.

GFCIs & Electrical: Inspected GFCIs

I inspected ground-fault circuit interrupter receptacles and circuit breakers observed and deemed to be GFCIs using a GFCI tester, where possible.

Walkways & Driveways: Walkways & Driveways Were Inspected

I inspected the walkways and driveways that were adjacent to the house.  The walkways, driveways, and parking areas that were far away from the house foundation were not inspected. 

Stairs, Steps, Stoops, Stairways & Ramps: Stairs, Steps, Stoops, Stairways & Ramps Were Inspected

I inspected the stairs, steps, stoops, stairways and ramps that were within the scope of my home inspection. 

All treads should be level and secure. Riser heights and tread depths should be as uniform as possible. As a guide, stairs must have a maximum riser of 7-3/4 inches and a minimum tread of 10 inches. 

Porches, Patios, Decks, Balconies & Carports: Porches, Patios, Decks, Balconies & Carports Were Inspected

I inspected the porches, patios, decks, balconies and carports at the house that were within the scope of the home inspection. 

Railings, Guards & Handrails: Railings, Guards & Handrails Were Inspected

I inspected the railings, guards and handrails that were within the scope of the home inspection. 

Windows: Windows Inspected

A representative number of windows from the ground surface was inspected. 

Exterior Doors: Exterior Doors Inspected

I inspected the exterior doors. 

Eaves, Soffits & Fascia: Inspection Was Restricted

I did not inspect all of the eaves, soffit, and facia.  It's impossible to inspect those areas closely during a home inspection.  A home inspection is not an exhaustive evaluation.  My inspection of the exterior was limited.  I did not reach and access closely every part of the eaves, soffit, and fascia.

Wall-Covering, Flashing & Trim: Inspection Was Restricted

I did not inspect all of the exterior wall-covering material.  A home inspection is not an exhaustive evaluation.  My inspection of the exterior was limited.  I did not reach and access closely every part of the exterior wall-covering. 

GFCIs & Electrical: Unable to Inspect Everything

I was unable to inspect every electrical component or proper installation of the GFCI system according to modern code. A licensed electrician or township building code inspector could perform that type of test, which is beyond the scope of my visual-only home inspection. I inspected the electrical system as much as I could according to the Home Inspection Standards of Practice.

Windows: Inspection Restricted

I did not inspect all windows. I did inspect a representative number of them. It's impossible to inspect every window component closely during a home inspection. A home inspection is not an exhaustive evaluation. I did not reach and access closely every window, particularly those above the first floor level. 

Exhaust Hoods: Unidentified Hoods

I observed some exterior exhaust hoods, but I was unable to identify them as to what their purpose was. 

Please refer to the Home Inspection Standards of Practice related to inspecting the exterior of the house. 


I. The inspector shall inspect:

  1. the exterior wall-covering materials; 
  2. the eaves, soffits and fascia;
  3. a representative number of windows;
  4. all exterior doors;
  5. flashing and trim;
  6. adjacent walkways and driveways;
  7. stairs, steps, stoops, stairways and ramps;
  8. porches, patios, decks, balconies and carports;
  9. railings, guards and handrails; and 
  10. vegetation, surface drainage, retaining walls and grading of the property, where they may adversely affect the structure due to moisture intrusion.


II. The inspector shall describe:

  1. the type of exterior wall-covering materials.


III. The inspector shall report as in need of correction:

  1. any improper spacing between intermediate balusters, spindles and rails.

$
Credit
Comment
2.2.1 - Eaves, Soffits & Fascia

Paint Surface in Poor Condition

I observed indications of paint or staining in poor condition.  Flaking, cracking, and worn areas. Correction and further evaluation is recommended. 

Paint roller Painting Contractor
$
Credit
Comment
2.3.1 - Wall-Covering, Flashing & Trim

Weep Screed Clearance

As water soaks into stucco, the building paper acts as a moisture barrier and drainage plane. The water drains out at the bottom of the wall through the weep screed. Landscaping or concrete should maintain a 2-inch minimum clearance to weep screed. 

Yard scissors Landscaping Contractor
$
Credit
Comment
2.4.1 - Vegetation, Surface Drainage, Retaining Walls & Grading

Negative or Incorrect Grading

Grading is sloped towards the home or may block water from draining away or out of the yard in some areas. This could lead to ponding, water intrusion, and foundation issues.

The ground around a house should slope away from all sides, ideally 6 inches for the first 10 feet from the house foundation perimeter. Downspouts, surface gutters, and drains should also be directing water away from the foundation. 

Yard scissors Landscaping Contractor
$
Credit
Comment
2.4.2 - Vegetation, Surface Drainage, Retaining Walls & Grading

Fence Defect
South

I observed that some areas of the block wall are separating from the home. The block wall and foundation was sturdy when tested and was not a hazardous condition at the time of inspection. The separation may be caused by footer movement from soil expansion, erosion or improper site drainage over time. Recommend monitoring the areas for further separation, if the gaps increase significantly or the wall becomes unstable immediately contact a qualified professional for evaluation and repair. 

Fence Fence Contractor
$
Credit
Comment
2.5.1 - GFCIs & Electrical

GFCI Defect
Exterior

I observed indications of a defect at a GFCI.  This GFCI did not have power when tested. I was unable to determine if the Ground Fault Circuit Interrupter was functioning properly. This may have been a result of the attached Photo Cell. Further evaluation and correction are recommended. 

Electric Electrical Contractor

3 - Plumbing

Main Water Shut-Off Valve: Location of Main Shut-Off Valve
Unable to Determine
Hot Water Source: Inspected TPR Valve

I inspected the temperature and pressure relief valve.  

Hot Water Source: Inspected Venting Connections

I inspected the venting connections. 

Hot Water Source: Inspected Seismic Bracing

I inspected the seismic bracing for the hot water tank. 

Main Fuel Supply Shut-Off Valve: Location of Main Shut-Off Valve
Side of House
Main Water Shut-Off Valve: Homeowner's Responsibility

It's your job to know where the main water and fuel shutoff valves are located. And be sure to keep an eye out for any water and plumbing leaks. 

Water Supply : Water Supply Is Public

The water supply to the house appeared to be from the public water supply source based upon the observed indications at the time of the inspection.  To confirm and be certain, I recommend asking the homeowner for details. 

Hot Water Source: Type of Hot Water Source
Gas-Fired Hot Water Tank

I inspected for the main source of the distributed hot water to the plumbing fixtures (sinks, tubs, showers).  I recommend asking the homeowner for details about the hot water equipment and past performance. 

Hot Water Source: Inspected Hot Water Source

I inspected the hot water source and equipment according to the Home Inspection Standards of Practice

Water Supply & Distribution Systems: Inspected Water Supply & Distribution Pipes

I attempted to inspect the water supply and distribution pipes (plumbing pipes). Not all of the pipes and components were accessible and observed. Inspection restriction. Ask the homeowner about water supply, problems with water supply, and water leaks in the past.  

Drain, Waste, & Vent Systems: Inspected Drain, Waste, Vent Pipes

I attempted to inspect the drain, waste, and vent pipes.  Not all of the pipes and components were accessible and observed.  Inspection restriction.  Ask the homeowner about water and sewer leaks or blockages in the past.  

Main Water Shut-Off Valve: Unable to Locate

I was unable to determine the location of the main water shut-off valve.  Ask the homeowner. 

Water Supply & Distribution Systems: Not All Pipes Were Inspected

The inspection was restricted because not all of the water supply pipes were exposed, readily accessible, and observed.  For example, most of the water distribution pipes, valves and connections were hidden within the walls.  

Drain, Waste, & Vent Systems: Not All Pipes Were Inspected

The inspection was restricted because not all of the pipes were exposed, readily accessible, and observed.  For example, most of the drainage pipes were hidden within the walls.  

I. The inspector shall inspect:

  1. the main water supply shut-off valve;
  2. the main fuel supply shut-off valve;
  3. the water heating equipment, including the energy source, venting connections, temperature/pressure-relief (TPR) valves, Watts 210 valves, and seismic bracing;
  4. interior water supply, including all fixtures and faucets, by running the water;
  5. all toilets for proper operation by flushing;
  6. all sinks, tubs and showers for functional drainage;
  7. the drain, waste and vent system; and
  8. drainage sump pumps with accessible floats.


II. The inspector shall describe:

  1. whether the water supply is public or private based upon observed evidence;
  2. the location of the main water supply shut-off valve;
  3. the location of the main fuel supply shut-off valve;
  4. the location of any observed fuel-storage system; and
  5. the capacity of the water heating equipment, if labeled.


III. The inspector shall report as in need of correction:

  1. deficiencies in the water supply by viewing the functional flow in two fixtures operated simultaneously;
  2. deficiencies in the installation of hot and cold water faucets;
  3. active plumbing water leaks that were observed during the inspection; and  
  4. toilets that were damaged, had loose connections to the floor, were leaking, or had tank components that did not operate.


$
Credit
Comment
3.3.1 - Hot Water Source

Old System

I observed during my inspection that the system appeared to be an older unit. Ask the homeowner or occupant about its recent performance. Regular maintenance and monitoring of its condition is recommended. Budgeting for repairs and future replacement is recommended. InterNACHI's Standard Estimate Life Expectancy Chart for Homes

Mag glass Monitor
$
Credit
Comment
3.4.1 - Water Supply & Distribution Systems

Corrosion at Water Shut-Off Valve

I observed small a water leak that developed into corrosion at a water supply shut-off valve under the sink. 

Pipes Plumbing Contractor
$
Credit
Comment
3.5.1 - Drain, Waste, & Vent Systems

Corrosion at Connection Under Sink.
Master Bathroom

I observed small a water leak that developed into corrosion at the drain pipe connection under the sink. There was no moisture present at the time of inspection. Correction is recommended. 

Contractor Qualified Professional

4 - Electrical

Service-Entrance Conductors: Inspected Service-Entrance Conductors

I inspected the electrical service-entrance conductors. 

Main Service Disconnect: Inspected Main Service Disconnect

I inspected the electrical main service disconnect.

Electrical Wiring: Type of Wiring, If Visible
NM-B (Romex)
Service Grounding & Bonding: Inspected the Service Grounding & Bonding

I inspected the electrical service grounding and bonding.

Electric Meter & Base: Inspected the Electric Meter & Base

I inspected the electrical electric meter and base. 

Main Service Disconnect: Homeowner's Responsibility

It's your job to know where the main electrical panel is located, including the main service disconnect that turns everything off. 

Be sure to test your GFCIs, AFCIs, and smoke detectors regularly. You can replace light bulbs, but more than that, you ought to hire an electrician. Electrical work is hazardous and mistakes can be fatal. Hire a professional whenever there's an electrical problem in your house. 

Main Service Disconnect: Main Disconnect Rating, If Labeled
150

I observed indications of the main service disconnect's amperage rating. It was labeled. 

Panelboards & Breakers: Inspected Main Panelboard & Breakers

I inspected the electrical panelboards and over-current protection devices (circuit breakers and fuses). 

Panelboards & Breakers: Inspected Subpanel & Breakers

I inspected the electrical subpanel and over-current protection devices (circuit breakers and fuses). 

GFCIs: Inspected GFCIs

I inspected ground-fault circuit interrupter receptacles and circuit breakers observed and deemed to be GFCIs using a GFCI tester, where possible.

Electrical Wiring: Unable to Inspect All of the Wiring

I was unable to inspect all of the electrical wiring. Obviously, most of the wiring is hidden from view within walls. Beyond the scope of a visual home inspection. 

Service Grounding & Bonding: Unable to Confirm Proper Grounding and Bonding

I was unable to confirm proper installation of the system grounding and bonding according to modern code. A licensed electrician or township building code inspector could perform that type of test, which is beyond the scope of my visual-only home inspection. I inspected the grounding and bonding as much as I could according to the Home Inspection Standards of Practice. 

GFCIs: Unable to Inspect Everything

I was unable to inspect every electrical component or proper installation of the GFCI system according to modern code. A licensed electrician or township building code inspector could perform that type of test, which is beyond the scope of my visual-only home inspection. I inspected the electrical system as much as I could according to the Home Inspection Standards of Practice.

I. The inspector shall inspect:

  1. the service drop;
  2. the overhead service conductors and attachment point;
  3. the service head, gooseneck and drip loops;
  4. the service mast, service conduit and raceway;
  5. the electric meter and base;
  6. service-entrance conductors;
  7. the main service disconnect;
  8. panelboards and over-current protection devices (circuit breakers and fuses);
  9. service grounding and bonding;
  10. a representative number of switches, lighting fixtures and receptacles, including receptacles observed and deemed to be arc-fault circuit interrupter (AFCI)-protected using the AFCI test button, where possible;
  11. all ground-fault circuit interrupter receptacles and circuit breakers observed and deemed to be GFCIs using a GFCI tester, where possible; and
  12. for the presence of smoke and carbon-monoxide detectors.


II. The inspector shall describe:

  1. the main service disconnect's amperage rating, if labeled; and 
  2. the type of wiring observed.


III. The inspector shall report as in need of correction:

  1. deficiencies in the integrity of the service-entrance conductors insulation, drip loop, and vertical clearances from grade and roofs;
  2. any unused circuit-breaker panel opening that was not filled;
  3. the presence of solid conductor aluminum branch-circuit wiring, if readily visible;
  4. any tested receptacle in which power was not present, polarity was incorrect, the cover was not in place, the GFCI devices were not properly installed or did not operate properly, evidence of arcing or excessive heat, and where the receptacle was not grounded or was not secured to the wall; and
  5. the absence of smoke and/or carbon monoxide detectors. 


5 - Kitchen

Kitchen Sink: Ran Water at Kitchen Sink

I ran water at the kitchen sink. 

Garbage Disposal: Turned On Garbage Disposal

I turned on the garbage disposal. 

GFCI: GFCI Tested

I observed ground fault circuit interrupter (GFCI) protection in the kitchen. 

Range/Oven/Cooktop: Turned On Stove & Oven

I turned on the kitchen's stove and oven. 

Exhaust Fan: Inspected Exhaust Fan

I inspected the exhaust fan in the kitchen. All mechanical exhaust fans should terminate outside. Confirming that the fan exhausts outside is beyond the scope of a home inspection. 

Windows: Windows Inspected

I inspected a representative number of windows according to the Home Inspection Standards of Practice by opening and closing them. I did not operate window locks and operation features, which is beyond the scope of a home inspection. 

Countertops & Cabinets: Inspected Cabinets & Countertops

I inspected a representative number of cabinets and countertop surfaces. 

Dishwasher: Inspected Dishwasher

I inspected the dishwasher by turning it on and letting it run a short cycle. 

Floors, Walls, Ceilings: Floors, Walls, Ceilings Inspected

I inspected the readily visible surfaces of floors, walls and ceilings. I looked for material defects according to the Home Inspection Standards of Practice

Refrigerator: Refrigerator Was On

I checked to see if the refrigerator was on. It was. That's all I inspected in relation to a refrigerator. Refrigerators are beyond the scope of a home inspection. 

The kitchen appliances are not included in the scope of a home inspection according to the Standards of Practice. 

The inspector will out of courtesy only check:

  • the stove, 
  • oven, 
  • microwave, and 
  • garbage disposer. 

$
Credit
Comment
5.1.1 - Kitchen Sink

Defect at Trap Component

I observed indications of an amateur repair for a leak at the kitchen sink drain. Recommend properly repair pipe to avoid potential water damage.

Contractor Qualified Professional
$
Credit
Comment
5.4.1 - Range/Oven/Cooktop

Missing Anti-Tip

I observed that the stove and oven appliance was not fastened to the wall. Anti-tip device is missing. This poses a safety hazard to children.

Contractor Qualified Professional
$
Credit
Comment
5.8.1 - Countertops & Cabinets

Cabinet Hinge Loose
Kitchen

I observed a loose cabinet door and hinge at the sink cabinet door.

Wrench DIY
$
Credit
Comment
5.8.2 - Countertops & Cabinets

Countertop Damaged
Kitchen

I observed damage at the countertop in 2 areas. 

House building Countertop Contractor
$
Credit
Comment
5.10.1 - Floors, Walls, Ceilings

Moderate Wear

Floors in the home exhibited moderate surface wear along major paths of travel. Recommend a qualified flooring contractor evaluate for possible re-finish. 

Contractor Qualified Professional

6 - Laundry

Clothes Washer: Did Not Inspect

I did not inspect the clothes washer and dryer fully. These appliances are beyond the scope of a home inspection. I did not operate the appliances. The clothes dryer exhaust pipe must be inspected and cleaned every year to help prevent house fires. 

Clothes Dryer: Did Not Inspect

I did not inspect the clothes washer and dryer fully. These appliances are beyond the scope of a home inspection. I did not operate the appliances. The clothes dryer exhaust pipe must be inspected and cleaned every year to help prevent house fires. 

The inspector shall inspect:

  • mechanical exhaust systems in the kitchen, bathrooms and laundry area.


$
Credit
Comment
6.2.1 - Clothes Dryer

Damaged Dryer Exhaust Pipe
Laundry

I observed indications of a damaged exhaust pipe of the clothes dryer. 

the maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend. The maximum length of the exhaust duct does not include the transition duct.

This means that vents should also be as straight as possible and cannot be longer than 35 feet. Any 90-degree turns in the vent reduce this 35-foot number by 5 feet since these turns restrict airflow.

Contractor Qualified Professional

7 - Bathrooms

Heat Source in Bathroom: Heat Source in Bathroom Was Inspected

I inspected the heat source in the bathroom (register/baseboard). 

Bathroom Toilets: Toilets Inspected

I flushed all of the toilets. 

Sinks, Tubs & Showers: Ran Water at Sinks, Tubs & Showers

I ran water at all bathroom sinks, bathtubs, and showers. I inspected for deficiencies in the water supply by viewing the functional flow in two fixtures operated simultaneously. 

Bathroom Exhaust Fan / Window: Inspected Bath Exhaust Fans

I inspected the exhaust fans of the bathroom(s). All mechanical exhaust fans should terminate outside. Confirming that the fan exhausts outside is beyond the scope of a home inspection. 

GFCI & Electric in Bathroom: GFCI-Protection Tested

I inspected the GFCI-protection at the receptacle near the bathroom sink by pushing the test button at the GFCI device or using a GFCI testing instrument. 

All receptacles in the bathroom must be GFCI protected. 

The home inspector will inspect: 

  • interior water supply, including all fixtures and faucets, by running the water;
  • all toilets for proper operation by flushing; and 
  • all sinks, tubs and showers for functional drainage.

$
Credit
Comment
7.2.1 - Sinks, Tubs & Showers

Damage at Fixture
Master Bathroom

I observed damage at the fixture. The sink stopper was not functioning. 

Contractor Qualified Professional
$
Credit
Comment
7.2.2 - Sinks, Tubs & Showers

Defective Bathtub Diverter.

This type of tub spout is fairly common in almost every home. The features of a diverter type tub spout includes a button that can be held up or one that is attached to the wall that creates the diversion of water from the bath to the shower. When the diverter is worn out or improperly installed water will pour out of both fixtures simultaneously and sometimes sound like an injured Wookie. See the video below.

Contractor Qualified Professional
$
Credit
Comment
7.6.1 - Cabinetry, Ceiling, Walls & Floor

Loose Towel Rack
Master Bathroom

The towel rack was loose. Recommend repair.  

Tools Handyman/DIY
$
Credit
Comment
7.6.2 - Cabinetry, Ceiling, Walls & Floor

Moisture Damage to Baseboard
Master Bathroom

I observed what appeared to be previous moisture damage to the baseboard in the 2nd Floor guest Bathroom near the tub. The area was dry when tested. I did not observe any active leaks when running the water for the tub or toilet. The damage may have been caused by not properly closing the curtain when the shower water is on. Further evaluation and correction is recommended.

Contractor Qualified Professional

8 - Doors, Windows & Interior

Doors: Doors Inspected

I inspected a representative number of doors according to the Home Inspection Standards of Practice by opening and closing them. I did not operate door locks and door stops, which is beyond the scope of a home inspection. 


Windows: Windows Inspected

I inspected a representative number of windows according to the Home Inspection Standards of Practice by opening and closing them. I did not operate window locks and operation features, which is beyond the scope of a home inspection. 

Switches, Fixtures & Receptacles: Inspected a Switches, Fixtures & Receptacles

I inspected a representative number of switches, lighting fixtures and receptacles. 

Floors, Walls, Ceilings: Floors, Walls, Ceilings Inspected

I inspected the readily visible surfaces of floors, walls and ceilings. I looked for material defects according to the Home Inspection Standards of Practice

Stairs, Steps, Stoops, Stairways & Ramps: Stairs, Steps, Stoops, Stairways & Ramps Were Inspected

I inspected the stairs, steps, stoops, stairways and ramps that were within the scope of my home inspection. 

All treads should be level and secure. Riser heights and tread depths should be as uniform as possible. As a guide, stairs must have a maximum riser of 7-3/4 inches and a minimum tread of 10 inches. 

Railings, Guards & Handrails: Railings, Guards & Handrails Were Inspected

I inspected a representative number railings, guards and handrails that were within the scope of the home inspection. 

Presence of Smoke and CO Detectors: Inspected for Presence of Smoke and CO Detectors

I inspected for the presence of smoke and carbon-monoxide detectors. 

There should be a smoke detector in every sleeping room, outside of every sleeping room, and one every level of a house. 

Switches, Fixtures & Receptacles: Unable to Inspect Everything

I was unable to inspect every electrical component or proper installation of the system according to modern code. A licensed electrician or township building code inspector could perform that type of test, which is beyond the scope of my visual-only home inspection. I inspected the electrical system as much as I could according to the Home Inspection Standards of Practice.

Presence of Smoke and CO Detectors: Unable to Test Every Detector

I was unable to test every detector. We recommend testing all of the detectors.  Ask the seller about the performance of the detectors and of any issues regarding them.  We recommend replacing all of the detectors (smoke and carbon monoxide) with new ones just for peace of mind and for safety concerns.  

The inspector shall inspect: 

  • a representative number of doors and windows by opening and closing them; 
  • floors, walls and ceilings; stairs, steps, landings, stairways and ramps; 
  • railings, guards and handrails; and 
  • garage vehicle doors and the operation of garage vehicle door openers, using normal operating controls. 

The inspector shall describe: 

  • a garage vehicle door as manually-operated or installed with a garage door opener. 

The inspector shall report as in need of correction: 

  • improper spacing between intermediate balusters, spindles and rails for steps, stairways, guards and railings; 
  • photo-electric safety sensors that did not operate properly; and 
  • any window that was obviously fogged or displayed other evidence of broken seals. 

$
Credit
Comment
8.2.1 - Windows

Window Trim Paint
1st Floor Bathroom

Observed worn/aged paint on trim areas of one or more windows. Recommend paint and caulking to prevent moisture penetration and damage to the area. 

Tools Handyman/DIY
$
Credit
Comment
8.3.1 - Switches, Fixtures & Receptacles

Light Inoperable, Could Be Bulb

I observed one or more lights that were not turning on. A new light bulb was possibly needed. We recommend asking the homeowner about why this light fixture did not turn on. 

Contractor Qualified Professional
$
Credit
Comment
8.3.2 - Switches, Fixtures & Receptacles

Cover Plates Missing or Damaged
2nd Floor Hallway, Laundry Room

I observed one or more wall receptacles with a missing or damaged cover plate. 

Electric Electrical Contractor

9 - Cooling

Thermostat and Normal Operating Controls: Thermostat Location
Dining room
Cooling System Information: Homeowner's Responsibility

Most air-conditioning systems in houses are relatively simple in design and operation. The adequacy of the cooling is often quite subjective and depends upon occupant perceptions that are affected by the distribution of air, the location of return-air vents, air velocity, the sound of the system in operation, and similar characteristics. 

It's your job to get the air conditioning system inspected and serviced every year. And if you're system as an air filter, be sure to keep that filter cleaned. 

Thermostat and Normal Operating Controls: Emergency Shut-Off Switch Inspected

I observed an emergency shut-off switch. I inspected it. It worked when I used it during my inspection.

Thermostat and Normal Operating Controls: Service Switch Inspected

I observed a service switch. I inspected it. It worked when I used it during my inspection. 

Condensate: Condensate Discharge Confirmed

I observed a discharge pipe apparently connected to the condensate pump installed at the cooling system. 

Ductwork: Ductwork Installed
Insulated

I observed ductwork in the house.  Air conditioning (cooling) systems, including heat pump systems, use ductwork to distribute the cooled, conditioned air throughout the house. I will attempt to determine if the each room has a cooling source or conditioned-air supply, but I may not be able to find every duct register.  

Cooling System Information: Cooling System Inaccessible

The heating system was inaccessible. The inspection was restricted and limited. 

Correction and further evaluation is recommended. 

I. The inspector shall inspect:

  1. the cooling system, using normal operating controls.


II. The inspector shall describe:

  1. the location of the thermostat for the cooling system; and
  2. the cooling method.


III. The inspector shall report as in need of correction:

  1. any cooling system that did not operate; and
  2. if the cooling system was deemed inaccessible.


10 - Attached Garage

Garage Vehicle Door: Type of Door Operation
Opener
Garage Vehicle Door Opener: Garage Door Panels Were Inspected

I inspected the garage door panels. 

Garage Vehicle Door Opener: Wall Control Button Label Was Inspected

I observed a warning label near the wall control button. Good. 

Garage Floor: Garage Floor Inspected

I inspected the floor of the attached garage. 

Garage Vehicle Door Opener: Manual Release

I checked for a manual release handle--a means of manually detaching the door from the door opener. 

The handle should be colored red so that it can be seen easily. The handle should be easily accessible and no more than 6 feet above the garage floor. The handle should not be in contact with the top of a vehicles.

Garage Vehicle Door Opener: Spring Warning Label Was Inspected

I observed a spring warning label attached to the spring assembly or the back of the door panel. Good. 

Garage Vehicle Door Opener: General Warning Label Was Inspected

I observed a general warning label attached to the back of the door panel. Good. 

Garage Vehicle Door Opener: Bottom Bracket Label Was Inspected

I observed two warning labels attached to the door in the vicinity of the bottom corner brackets. Some newer doors have tamper-resistant bottom corner brackets that do not require these warning labels.

Garage Vehicle Door Opener: Springs, Bracket & Hardware Were Inspected

I closed the door and checked the springs for damage. If a spring was broken, operating the door can cause serious injury or death. I would not operate the door if there was damage. 

I visually checked the doors hinges, brackets and fasteners. If the door had an opener, the door must have an opener-reinforcement bracket that is securely attached to the doors top section. The header bracket of the opener rail must be securely attached to the wall or header using lag bolts or concrete anchors. 

Garage Vehicle Door Opener: Door Was Manually Opened and Closed

I closed the door. If the door had an opener, I pulled the manual release to disconnect the door from the opener. I lifted and operated the door. If the door was hard to lift, then it is out of balance. This is an unsafe condition. 

I raised the door to the fully-open position, then closed the door. The door should move freely, and it should open and close without difficulty. As the door operates, I make sure that the rollers stay in the track. The door should stay in the fully open position. The door should also stay in a partially opened position about three to four above the garage floor level. 

I reconnected the door to the opener, if present. 

I checked the door handles or gripping points.  

Garage Vehicle Door Opener: Wall Push Button Was Inspected

I inspected the wall button. The wall button should be at least 5 feet above the standing surface, and high enough to be out of reach of small children. I pressed the push button to see if it successfully operated the door.

Garage Vehicle Door Opener: Non-Contact Reversal Was Inspected

I observed the auto-reverse feature during a non-contact test. 

Standing inside the garage but safely away from the path of the door, I used the remote control or wall button to close the door. As the door was closing, I waved an object in the path of the photoelectric eye beam. The door should automatically reverse.

Garage Vehicle Door Opener: Photo-Electric Eyes Were Inspected

I inspected the photo-electric eyes. 

Federal law states that residential garage door openers manufactured after 1992 must be equipped with photo-electric eyes or some other safety-reverse feature that meets UL 325 standards.

I checked to see if photo-electric eyes are installed. The vertical distance between the photo-eye beam and the floor should be no more than 6 inches.

Ceiling, Walls & Firewalls in Garage: Garage Ceiling & Walls Were Inspected

I inspected the ceiling and walls of the garage according to the Home Inspection Standards of Practice.

Ceiling, Walls & Firewalls in Garage: Door Between Garage and House Was Inspected

I inspected the door between the attached garage and the house. 

The door should be a solid wood door at least 1-3/8 inches thick, a solid or honeycomb-core steel door at least 1-3/8 inches thick, or a 20-minute fire-rated door. 

The door should be equipped with a self-closing or an automatic-closing device. 

Ceiling, Walls & Firewalls in Garage: Can't See Everything

I can not observe everything. Inspection restrictions. My inspection was limited. 

The inspector shall inspect:

  • garage vehicle doors and the operation of garage vehicle door openers, using normal operating controls.


The inspector shall describe:

  • a garage vehicle door as manually-operated or installed with a garage door opener.


$
Credit
Comment
10.3.1 - Garage Vehicle Door Opener

Recommend Annual Garage Door Service
Garage

The drive mechanism on the motor appeared to be loose and may need tightening. It is recommended that the door and opener be visually inspected monthly by the homeowner. The garage door should be serviced by a qualified professional on a yearly basis. Due to the strain that garage door components and openers regularly endure, they may become defective over time and need to be fixed or replaced. Defective components may create safety hazards as well as functional deficiencies to the garage door assembly 

Contractor Qualified Professional
$
Credit
Comment
10.5.1 - Ceiling, Walls & Firewalls in Garage

Moisture Intrusion

Garage walls showed signs of previous moisture intrusion (watermarks) The damaged areas appeared to be repaired. I was unable to verify the effectiveness of the repairs. Recommend a qualified contractor evaluate and find the source of the moisture and confirm the previous repairs to prevent further damage. 

Contractor Qualified Professional

11 - Heating

Heating System Information: Energy Source
Gas, Heat Pump
Heating System Information: Heating Method
Warm-Air Heating System, Heat Pump System
Thermostat and Normal Operating Controls: Thermostat Location
Dining room
Heating System Information: Homeowner's Responsibility

Most HVAC (heating, ventilating and air-conditioning) systems in houses are relatively simple in design and operation. They consist of four components: controls, fuel supply, heating or cooling unit, and distribution system. The adequacy of heating and cooling is often quite subjective and depends upon occupant perceptions that are affected by the distribution of air, the location of return-air vents, air velocity, the sound of the system in operation, and similar characteristics. 

It's your job to get the HVAC system inspected and serviced every year. And if you're system as an air filter, be sure to keep that filter cleaned. 

Heating System Information: Heating System Inaccessible

The heating system was inaccessible. The inspection was restricted and limited. 

Correction and further evaluation is recommended. 

I. The inspector shall inspect:

  1. the heating system, using normal operating controls.


II. The inspector shall describe:

  1. the location of the thermostat for the heating system;
  2. the energy source; and
  3. the heating method.


III. The inspector shall report as in need of correction:

  1. any heating system that did not operate; and
  2. if the heating system was deemed inaccessible.

12 - Attic, Insulation & Ventilation

Insulation in Attic: Type of Insulation Observed
Cellulose
Mechanical Exhaust System: Mechanical Exhaust in Kitchen Inspected

I inspected the mechanical exhaust system in the kitchen. 

Mechanical Exhaust System: Mechanical Exhaust in Bathrooms Inspected

I inspected the mechanical exhaust system in the bathrooms. 

Mechanical Exhaust System: Mechanical Exhaust in Laundry Room Inspected

I inspected the mechanical exhaust system in the laundry room area. 

Mechanical Exhaust System: Exhaust Fans
Fan Only
Structural Components & Observations in Attic: Structural Components Were Inspected

Structural components were inspected from the attic space according to the Home Inspection Standards of Practice

Insulation in Attic: Insulation Was Inspected

During the home inspection, I inspected for insulation in unfinished spaces, including attics, crawlspaces and foundation areas.  I inspected for ventilation of unfinished spaces, including attics, crawlspaces and foundation areas.  And I inspected mechanical exhaust systems in the kitchen, bathrooms and laundry area.

I attempted to describe the type of insulation observed and the approximate average depth of insulation observed at the unfinished attic floor area or roof structure.

I reported as in need of correction the general absence of insulation or ventilation in unfinished spaces.


Insulation in Attic: Approximate Average Depth of Insulation
6-9 inches

Determining how much insulation should be installed in a house depends upon where a home is located. The amount of insulation that should be installed at a particular area of a house is dependent upon which climate zone the house is located and the local building codes.  

Ventilation in Attic: Ventilation Inspected

During the home inspection, I inspected for ventilation in unfinished spaces, including attics, crawlspaces and foundation areas. And I inspected for mechanical exhaust systems. 

I report as in need of correction the general absence of ventilation in unfinished spaces.

Structural Components & Observations in Attic: Could Not See Everything in Attic

I could not see and inspect everything in the attic space. The access is restricted and my inspection is limited. 

Mechanical Exhaust System: Unable to Verify if all Venting Terminates to the Exterior.

My attic access was limited. I was unable to verify if all vent duct terminates to the exterior. 

The inspector shall inspect: 

  • insulation in unfinished spaces, including attics, crawlspaces and foundation areas; 
  • ventilation of unfinished spaces, including attics, crawlspaces and foundation areas; and 
  • mechanical exhaust systems in the kitchen, bathrooms and laundry area. 

The inspector shall describe: 

  • the type of insulation observed; and 
  • the approximate average depth of insulation observed at the unfinished attic floor area or roof structure. 

The inspector shall report as in need of correction: 

  • the general absence of insulation or ventilation in unfinished spaces. 

13 - Roof

Roof Covering: Homeowner's Responsibility

Your job as the homeowner is to monitor the roof covering because any roof can leak. To monitor a roof that is inaccessible or that cannot be walked on safely, use binoculars. Look for deteriorating or loosening of flashing, signs of damage to the roof covering and debris that can clog valleys and gutters.

Roofs are designed to be water-resistant. Roofs are not designed to be waterproof. Eventually, the roof system will leak. No one can predict when, where or how a roof will leak. 

Every roof should be inspected every year as part of a homeowner's routine home maintenance plan. Catch problems before they become major defects.


Roof Covering: Type of Roof-Covering Described
Tile

I observed the roof-covering material and attempted to identify its type.  

This inspection is not a guarantee that a roof leak in the future will not happen. Roofs leak.  Even a roof that appears to be in good, functional condition will leak under certain circumstances. We will not take responsibility for a roof leak that happens in the future.  This is not a warranty or guarantee of the roof system.

Roof Covering: Roof Was Inspected
Drone

We attempted to inspect the roof from various locations and methods, including from the ground and a ladder. 

The inspection was not an exhaustive inspection of every installation detail of the roof system according to the manufacturer's specifications or construction codes.  It is virtually impossible to detect a leak except as it is occurring or by specific water tests, which are beyond the scope of our inspection.  We recommend that you ask the sellers to disclose information about the roof, and that you include comprehensive roof coverage in your home insurance policy.  

Flashing: Wall Intersections

I looked for flashing where the roof covering meets a wall or siding material.  There should be step and counter flashing installed in these locations.  This is not an exhaustive inspection of all flashing areas.

Flashing: Eaves and Gables

I looked for flashing installed at the eaves (near the gutter edge) and at the gables (the diagonal edge of the roof).  There should be metal drip flashing material installed in these locations.  The flashing helps the surface water on the roof to discharge into the gutter.  Flashing also helps to prevent water intrusion under the roof-covering. 

Plumbing Vent Pipes: Homeowner's Responsibility

Your job is to monitor the flashing around the plumbing vent pipes that pass through the roof surface.  Sometimes they deteriorate and cause a roof leak.  

Be sure that the plumbing vent pipes do not get covered, either by debris, a toy, or snow.

Plumbing Vent Pipes: Plumbing Vent Pipes Inspected

I looked at DWV (drain, waste and vent) pipes that pass through the roof covering.  There should be watertight flashing (often black rubber material) installed around the vent pipes.  These plumbing vent pipes should extend far enough above the roof surface.  This vent pipe 

Flue Gas Vent Pipes: Homeowner's Responsibility

Your job is to monitor the flashing around the flue gas vent pipes that pass through the roof surface.  Sometimes they deteriorate and cause a roof leak.  

Flue Gas Vent Pipes: Flue Gas Vent Pipe Inspected

I looked at flue gas vent pipes that pass through the roof covering. 

All gas-fired appliances must be connected to venting systems. There should be watertight metal flashing installed around the flue gas vent pipes.  The vent pipes should extend far enough above the roof surface.  

Gutters & Downspouts: Homeowner's Responsibility

Your job is to monitor the gutters and be sure that they function during and after a rainstorm. Look for loose parts, sagging gutter ends, and water leaks. The rain water should be diverted far away from the house foundation. 

Roof Covering: Unable to See Everything

This is a visual-only inspection of the roof-covering materials. It does not include an inspection of the entire system. There are components of the roof that are not visible or accessible at all, including the underlayment, decking, fastening, flashing, age, shingle quality, manufacturer installation recommendations, etc. 

Roof Covering: Unable to Walk Upon Roof Surface

According to the Home Inspection Standards of Practice, a home inspector is not required to walk upon any roof surface.  However, as courtesy only, I attempted to walk upon the roof surface, but was unable.  It was not safe.  It was not accessible.  This was a restriction to my inspection of the roof system.  You may want to consider hiring a professional roofer with a lift to check your roof system.   

Flashing: Difficult to See Every Flashing

I attempted to inspect the flashing related to the vent pipes, wall intersections, eaves and gables, and the roof-covering materials.  In general, there should be flashing installed in certain areas where the roof covering meets something else, like a vent pipe or siding.  Most flashing is not observable, because the flashing material itself is covered and hidden by the roof covering or other materials.  So, it's impossible to see everything.  A home inspection is a limited visual-only inspection.  

Plumbing Vent Pipes: Unable to Reach All the Pipes

I was unable to closely reach and observe all of the vent pipes that pass through the roof-covering materials.  This was an inspection restriction. 

Flue Gas Vent Pipes: Unable to Reach All the Flue Gas Vent Pipes

I was unable to closely reach and observe all of the flue gas vent vent pipes that pass through the roof-covering materials.  This was an inspection restriction. 

Gutters & Downspouts: Couldn't Reach the Gutters

I was unable to closely reach and closely inspect the installation of all of the gutter components and systems.  

Please refer to the Home Inspection Standards of Practice related to inspecting the roof of the house.  

Monitor the roof covering because any roof can leak.  To monitor a roof that is inaccessible or that cannot be walked on safely, use binoculars. Look for deteriorating or loosening of flashing, signs of damage to the roof covering and debris that can clog valleys and gutters. 

Roofs are designed to be water-resistant.  Roofs are not designed to be waterproof.  Eventually, the roof system will leak.  No one can predict when, where or how a roof will leak. 


I. The inspector shall inspect from ground level or the eaves:

  1. the roof-covering materials;
  2. the gutters;
  3. the downspouts;
  4. the vents, flashing, skylights, chimney, and other roof penetrations; and 
  5. the general structure of the roof from the readily accessible panels, doors or stairs.


II. The inspector shall describe:

  1. the type of roof-covering materials.


III. The inspector shall report as in need of correction:

  1. observed indications of active roof leaks.

$
Credit
Comment
13.1.1 - Roof Covering

Cracked Roof-Covering Material

I observed cracked, damaged or missing roof tiles.  Prone to leaking.  Correction and further evaluation by a professional roofer is recommended.

Roof Roofing Professional
$
Credit
Comment
13.1.2 - Roof Covering

Tree Too Close
West

I observed that a tree and tree branch were overhanging the roof and maybe in contact with it. This may lead to premature wear or damage to the roof covering.  Recommend trimming the branches back. 

Yard scissors Tree Service
$
Credit
Comment
13.3.1 - Plumbing Vent Pipes

Attic Vent Pipe or Roof Vent Flashing Leak
Attic

I observed indications that sometime in the past, there was water penetration or intrusion into the attic under a plumbing vent pipe. Very small watermarks were observed on the insulation but those areas were dry when tested. Correction and further evaluation are recommended. NOTE: See the section on roof covering and flashing.  

Contractor Qualified Professional